How to skillfully deal with the wrinkling phenomenon of double head hydraulic pipe bender?
2018/3/14 9:59:42
Xiaobian will tell you how to deal with the wrinkling phenomenon of double head hydraulic pipe bender:
1. If the double head hydraulic pipe bender accepts too much clamping force of the guide formwork, move the guide formwork a little, or if the pipe accepts too much clamping force of the guide formwork, move the front guide formwork a little, and then adjust the inclination of the rear guide formwork;
2. The heart baseball may be assembled at a smaller distance (that is, the distance between the two balls of the heart baseball should be close);
3. The pipe data is too soft or inappropriate.
There are deep scratches in the whole winding area and the rear guide die area
Countermeasures:
1. Add the inclination of the rear guide die (i.e. the flat end of the rear guide die cannot touch the pipe, so it is necessary to
About 0.8 ~ 1.5m / M);
2. In order to reduce friction, properly use lubricant.
Welcome to discuss together.
1. If the double head hydraulic pipe bender accepts too much clamping force of the guide formwork, move the guide formwork a little, or if the pipe accepts too much clamping force of the guide formwork, move the front guide formwork a little, and then adjust the inclination of the rear guide formwork;
2. The heart baseball may be assembled at a smaller distance (that is, the distance between the two balls of the heart baseball should be close);
3. The pipe data is too soft or inappropriate.
There are deep scratches in the whole winding area and the rear guide die area
Countermeasures:
1. Add the inclination of the rear guide die (i.e. the flat end of the rear guide die cannot touch the pipe, so it is necessary to
About 0.8 ~ 1.5m / M);
2. In order to reduce friction, properly use lubricant.
Welcome to discuss together.